Rotor

Check the inputs. Make a plan. Bring only what you still need.

Selected recipe · Fabricator

The source rate is 20 Rotor per minute. The table below converts each input rate into its theoretical cost per output item. Rates are reference ratios, not a promise about real-world completion time.

Ingredient	Input per minute	Per output item
Titanium Rod	20	1
Wolfram Wire	20	1

Default source recipe: fabricator:8. Other machine tiers and alternative recipes may use different proportions. This planner selects the first default source recipe for each output.

Compare included machine tiers

This snapshot includes 2 default machine recipes for Rotor. Compare each recipe's direct input-to-output proportions below. The planner and every example on this page still use the first default recipe, Fabricator; this table does not change that selection or optimize the dependency chain. Explicit alternative recipes are excluded, and these rows do not establish unlock requirements, discrete craft batches, construction costs, or completion times.

Included default recipes; material amounts are per output item.
Machine	Source output/min	Direct inputs per output	Planner selection
Fabricator `fabricator:8`	20	1 Titanium Rod 1 Wolfram Wire	Selected default
Fabricator v.2 `craftertier2:4`	40	0.75 Titanium Rod 0.75 Wolfram Wire	Reference only

See a worked StarRupture ratio and shared-inventory example.

Worked example: plan 10 Rotor

With no inventory, the selected recipe chain expands to the terminal resources below. The plan contains 5 production steps. Theoretical amounts retain fractions; the gathering column rounds each resource up once. Real craft batches may need additional inputs.

Reference resource budget for 10 Rotor, before inventory
Terminal resource	Theoretical amount	Rounded gathering amount
Titanium Ore	10	10
Wolfram Ore	5	5

Already have Rotor or any of its intermediate parts? Open this target in the inventory-aware planner to calculate the remaining budget.

Show all 5 production steps in dependency order

Theoretical production quantities; dependencies come before the items that use them.
Produce	Remaining quantity	Selected machine
Titanium Bar	10	Smelter
Wolfram Bar	5	Smelter
Titanium Rod	10	Fabricator
Wolfram Wire	10	Fabricator
Rotor	10	Fabricator

A REALISTIC STOCK CHECK

Restock to 24 Rotor

Top up a finished-parts stock without producing the Rotor and intermediate parts already in storage again.

Set the total goal to 24 Rotor, including 6 finished items already owned. After that finished stock is deducted, the engine leaves 18 Rotor to produce. Only that remaining production expands into ingredients.

Starting inventory for this example; stock is one shared balance within this plan.
Stock level	Item	Available	Used by this plan
Finished	Rotor	6	6
Intermediate	Titanium Rod	8	8
Intermediate	Wolfram Wire	5	5
Raw	Titanium Ore	10	10
Raw	Wolfram Ore	3	3

What changes on the gathering list?

Same total target and selected default recipes. Compare empty inventory with the finished, intermediate and raw stock above.
Terminal resource	No inventory: gather	With listed stock: gather	Less to gather
Titanium Ore	2424 theoretical	00 theoretical	24
Wolfram Ore	1212 theoretical	43.5 theoretical	8

The target is the total Rotor goal, including finished Rotor already owned. Stored rods and wire cover part of the remaining production chain; the ore stock is applied only after those component deductions. Entering the already-reduced target and the same finished inventory would subtract the finished parts twice.

Opening an example replaces the plan saved in this browser with an editable snapshot. Export your current plan first if you want to keep it. Copies do not synchronize.

Edit the no-stock plan →Edit the stocked plan →

Audit the two engine-generated lists and the remaining production chain

Restock to 24 Rotor: no-inventory material budget
Terminal resource	Required	Stock used	Remaining, theoretical	Gather, rounded up
Titanium Ore	24	0	24	24
Wolfram Ore	12	0	12	12

Restock to 24 Rotor: material budget after the listed inventory
Terminal resource	Required	Stock used	Remaining, theoretical	Gather, rounded up
Titanium Ore	10	10	0	0
Wolfram Ore	6.5	3	3.5	4

Show all 5 production steps in dependency order

Theoretical production quantities; dependencies come before the items that use them.
Produce	Remaining quantity	Selected machine
Titanium Bar	10	Smelter
Wolfram Bar	6.5	Smelter
Titanium Rod	10	Fabricator
Wolfram Wire	13	Fabricator
Rotor	18	Fabricator

All quantities above are generated by the same planning engine as the editable snapshots. The first included default recipe per output is used. Theoretical ratios keep their fractions; only the final terminal gathering shortfall is rounded up. Actual craft batches may need additional inputs. Follow the corresponding field-guide walkthrough.

What uses Rotor?

The selected default recipes below directly consume Rotor. Open an output item to inspect its complete dependency chain.

Stabilizer — 1 Rotor per output item, using Fabricator.
Turbine — 2 Rotor per output item, using Mega Press.

Before you build

The plan combines shared ingredient demand and consumes your inventory once across all targets. Enter any finished parts you already own before collecting raw materials. Rounded gathering quantities are an allowance over theoretical ratios; actual discrete craft batches may need additional supplies.

Dataset: Update 2 · Quality of Life · snapshot retrieved 2026-10-30. Source, version, and assumptions.