Electronics

Check the inputs. Make a plan. Bring only what you still need.

Selected recipe · Furnace

The source rate is 10 Electronics per minute. The table below converts each input rate into its theoretical cost per output item. Rates are reference ratios, not a promise about real-world completion time.

Ingredient	Input per minute	Per output item
Synthetic Silicon	20	2
Inductor	10	1
Stator	10	1

Default source recipe: furnace:8. Other machine tiers and alternative recipes may use different proportions. This planner selects the first default source recipe for each output.

Compare included machine tiers

This snapshot includes 2 default machine recipes for Electronics. Compare each recipe's direct input-to-output proportions below. The planner and every example on this page still use the first default recipe, Furnace; this table does not change that selection or optimize the dependency chain. Explicit alternative recipes are excluded, and these rows do not establish unlock requirements, discrete craft batches, construction costs, or completion times.

Included default recipes; material amounts are per output item.
Machine	Source output/min	Direct inputs per output	Planner selection
Furnace `furnace:8`	10	2 Synthetic Silicon 1 Inductor 1 Stator	Selected default
Furnace v.2 `furnacetier2:electronics_v2`	30	0.667 Synthetic Silicon 0.667 Inductor 0.333 Stator	Reference only

See a worked StarRupture ratio and shared-inventory example.

Worked example: plan 10 Electronics

With no inventory, the selected recipe chain expands to the terminal resources below. The plan contains 17 production steps. Theoretical amounts retain fractions; the gathering column rounds each resource up once. Real craft batches may need additional inputs.

Reference resource budget for 10 Electronics, before inventory
Terminal resource	Theoretical amount	Rounded gathering amount
Calcium Ore	14.167	15
Helium-3	10	10
Titanium Ore	37.083	38
Wolfram Ore	12.5	13

Already have Electronics or any of its intermediate parts? Open this target in the inventory-aware planner to calculate the remaining budget.

Show all 17 production steps in dependency order

Theoretical production quantities; dependencies come before the items that use them.
Produce	Remaining quantity	Selected machine
Calcium Block	14.167	Smelter
Titanium Bar	37.083	Smelter
Wolfram Bar	12.5	Smelter
Calcite Sheets	15	Fabricator
Titanium Beam	20	Fabricator
Titanium Rod	2.5	Fabricator
Titanium Sheet	42.5	Fabricator
Wolfram Powder	15	Furnace
Calcium Powder	20	Furnace
Ceramics	30	Furnace
Titanium Housing	20	Furnace
Tube	10	Fabricator
Wolfram Wire	15	Fabricator
Inductor	10	Furnace
Stator	10	Fabricator
Synthetic Silicon	20	Furnace
Electronics	10	Furnace

A REALISTIC STOCK CHECK

Rebuild a 12-Electronics buffer

Combine finished Electronics, usable Stator and Synthetic Silicon, and raw stock in one remaining-materials budget.

Set the total goal to 12 Electronics, including 3 finished items already owned. After that finished stock is deducted, the engine leaves 9 Electronics to produce. Only that remaining production expands into ingredients.

Starting inventory for this example; stock is one shared balance within this plan.
Stock level	Item	Available	Used by this plan
Finished	Electronics	3	3
Intermediate	Stator	2	2
Intermediate	Synthetic Silicon	6	6
Raw	Calcium Ore	15	9.25
Raw	Titanium Ore	8	8
Raw	Wolfram Ore	5	5

What changes on the gathering list?

Same total target and selected default recipes. Compare empty inventory with the finished, intermediate and raw stock above.
Terminal resource	No inventory: gather	With listed stock: gather	Less to gather
Calcium Ore	1717 theoretical	00 theoretical	17
Helium-3	1212 theoretical	66 theoretical	6
Titanium Ore	4544.5 theoretical	1918.708 theoretical	26
Wolfram Ore	1515 theoretical	54.25 theoretical	10

The finished Electronics reduce how much Electronics must be produced. Existing Stator and Synthetic Silicon then cover their own demand before their ingredients expand. The remaining branches still share one raw-stock balance; stock reserved for another plan is not available to deduct here.

Opening an example replaces the plan saved in this browser with an editable snapshot. Export your current plan first if you want to keep it. Copies do not synchronize.

Edit the no-stock plan →Edit the stocked plan →

Audit the two engine-generated lists and the remaining production chain

Rebuild a 12-Electronics buffer: no-inventory material budget
Terminal resource	Required	Remaining, theoretical	Gather, rounded up
Calcium Ore	17	17	17
Helium-3	12	12	12
Titanium Ore	44.5	44.5	45
Wolfram Ore	15	15	15

Rebuild a 12-Electronics buffer: material budget after the listed inventory
Terminal resource	Required	Stock used	Remaining, theoretical	Gather, rounded up
Calcium Ore	9.25	9.25	0	0
Helium-3	6	0	6	6
Titanium Ore	26.708	8	18.708	19
Wolfram Ore	9.25	5	4.25	5

Show all 17 production steps in dependency order

Theoretical production quantities; dependencies come before the items that use them.
Produce	Remaining quantity	Selected machine
Calcium Block	9.25	Smelter
Titanium Bar	26.708	Smelter
Wolfram Bar	9.25	Smelter
Calcite Sheets	10.5	Fabricator
Titanium Beam	14	Fabricator
Titanium Rod	2.25	Fabricator
Titanium Sheet	30.25	Fabricator
Wolfram Powder	10.5	Furnace
Calcium Powder	12	Furnace
Ceramics	21	Furnace
Titanium Housing	14	Furnace
Tube	9	Fabricator
Wolfram Wire	11.5	Fabricator
Inductor	9	Furnace
Stator	7	Fabricator
Synthetic Silicon	12	Furnace
Electronics	9	Furnace

All quantities above are generated by the same planning engine as the editable snapshots. The first included default recipe per output is used. Theoretical ratios keep their fractions; only the final terminal gathering shortfall is rounded up. Actual craft batches may need additional inputs. Follow the corresponding field-guide walkthrough.

What uses Electronics?

The selected default recipes below directly consume Electronics. Open an output item to inspect its complete dependency chain.

Accumulator — 1 Electronics per output item, using Assembler.
Onboard Instruments — 0.5 Electronics per output item, using Assembler.
Battery — 1 Electronics per output item, using Mega Press.

Before you build

The plan combines shared ingredient demand and consumes your inventory once across all targets. Enter any finished parts you already own before collecting raw materials. Rounded gathering quantities are an allowance over theoretical ratios; actual discrete craft batches may need additional supplies.

Dataset: Update 2 · Quality of Life · snapshot retrieved 2026-10-30. Source, version, and assumptions.